Armed with some basic tools and some DIY magazine we decided to do a DIY pathway- a small project that can be handled on several weekends. First we need to get the pathway ready by leveling the area by adding sand and fine graphite aggregate. Put up wooden plank on each side so as to hold the mold and ensure that the sides are straight and neat.
 |
| place wire mesh on top before pouring in the cement. This is to hold the dried concrete so that it will be sturdier and doesn't crumble and break |
 |
| mix dried cement with fine graphite aggregate and sand |
 |
| starting from the middle add water and mix in the cement to form a paste |
 |
| mixed cement ready to be poured onto the pathway |
...another attempt at pathway DIY
